The Printed Circuit Designer's Guide to...™
Thermal Management with Insulated Metal Substrates

by: Didier Mauve and Ian Mayoh, Ventec International Group

Considering thermal issues in the earliest stages of the design process is critical. Written by Didier Mauve, sales and marketing manager at Ventec International Group, and Ian Mayoh, technical support manager, this book highlights the need to dissipate heat from electronic devices.

The authors provide essential information required to understand the thermal, electrical, and mechanical characteristics of insulated metal substrate laminates. The book also aims to aid PCB designers in the selection and specification of materials for particular applications, which will contribute to more reliable and cost-effective designs.

Readers will develop a comprehensive awareness of the physical realities of insulated metal substrates and their applications in the thermal management of electronic assemblies.



ISBN: 978-0-9998648-1-4

Didier Mauve

Well known and highly respected in the printed circuit community, Didier Mauve brings over 25 years of industry experience with him. His CV includes roles such as the sales and marketing manager of one of the leading distributors in Europe, and as managing director of the largest copper-foil converting service in Europe. Mauve joined Ventec in 2015 to strategically drive European sales. His particular expertise and interest in thermal management technology has been instrumental in helping Ventec become a global leader for high-tech and high-reliability materials.


Ian Mayoh

With over 30 years’ hands-on experience in PCB manufacturing following his formal education in physical science, Ian Mayoh joined the PCB industry with Hoechst AG, which was initially based in the UK. Over 10 years, Mayoh held numerous senior positions throughout Europe, Australasia, and the Far East. Since returning to the UK in 1994, he has held various positions with LeaRonal, Elga Europe, and Amphenol Invotec. Following a short period working in specialty composite materials, Mayoh joined Ventec in 2011 as technical support manager covering the European, Middle Eastern, and North African market areas. He is a key member of the global technical team with direct support from Ventec International Group’s headquarters in Suzhou, China, and is also a Fellow of the UK's Institute of Circuit Technology.

Ventec International Group is a world leader in the production of polyimide and high-quality, high-performance copper-clad laminates and prepregs used in a wide range of PCB and associated applications. Ventec is a global company with an extensive footprint of manufacturing, distribution, technical service, and sales centers throughout Asia, Europe, and the United States. A fully owned and managed global supply chain allows Ventec to readily and consistently supply quality products to all markets in all geographic areas.

Ventec’s solutions include the latest advances in high-performance IMS materials that deliver exceptional thermal performance, reliability, and quality that is particularly demanded by automotive, medical, aerospace, and military markets, including LED lighting and DC power conversion applications. With tec-speed©, Ventec offers an advanced range of PCB materials for high-speed low-loss applications. PCB base materials are also part of the Ventec portfolio, including complementary products such as flex- and rigid-flex circuit board materials; backup, entry, and routing materials, foils, and coatings. Their latest tec-speed© 10 ultra-low Dk material with Dk values between 2.3 and 2.8 achieves lower losses, lower system power requirements, while balancing performance and cost.

Wherever technology takes you, Ventec delivers! For more information, visit www.venteclaminates.com.

This book has been technically reviewed by the following experts in the PCB industry:

Alun Morgan
Chairman, EIPC

Jim Francey
Sales Manager, Optiprint AG

Chapter Summaries

  • Chapter 1

    Overview


    Chapter 1 summarizes the essential information required to understand the thermal, electrical, and mechanical characteristics of insulated metal substrate laminates.
  • Chapter 2

    Management of Junction Temperature and the Concept of Thermal Resistance


    Chapter 2 clarifies various terms and concepts, including thermal conductivity, thermal resistance, and thermal impedance.
  • Chapter 3

    Developments in Insulated Metal Substrate Laminates


    Chapter 3 explores assorted materials, their availability and properties, sheet and panel sizes, and other recent developments in metal substrates.
  • Chapter 4

    Application Examples


    Chapter 4 discusses a variety of primary application areas for insulated metal substrates.
  • Chapter 5

    Design Considerations—Choosing the Material to Suit the Application


    Chapter 5 offers numerous design, cost, and thermal considerations.
  • Chapter 6

    Specifying the Right Substrate


    Chapter 6 highlights parameters to consider when aiming to match material characteristics to end-use requirements.
  • Chapter 7

    Scope for Design with Insulated Metal Substrates


    Chapter 7 explores design options other than single-sided and single-layered circuits.
  • Chapter 8

    Manufacturing and Assembly Considerations


    Chapter 8 addresses challenges within manufacturing and assembly, and a variety of solderable and solder resist finishes.
  • Chapter 9

    Reliability Considerations


    Chapter 9 focuses on reliability issues, test conditions, and results

What Our Readers Are Saying

Contact the Author

For technical support click here

Alun MorganAlun Morgan is the chairman of the EIPC, The European Institute for the PCB Community. He also holds the position of project facilitator and European representative of the High Density Packaging User Group, and is a board director and charity trustee of Scottish Autism. Alun began his career as a research investigator at the Institute of Physics’ Fulmer Research Institute in the UK. After serving as the technical manager of Nevin Electric, a PCB manufacturer, he joined MAS Electronics, a PCB materials supplier, in 1982 and became the UK general manager in 1990. Following the acquisition of MAS by Isola, Alun joined the Isola management team. In 2001, he was appointed corporate vice-president of operations and engineering of the Isola Group Worldwide. Alun holds a B.Sc. honours degree in metallurgy from the Department of Materials Science and Engineering at the University of Surrey, and is a Fellow of the Institute of Circuit Technology.

Jim FranceyJim Francey has over thirty years of experience in the PCB industry and is a Fellow of the UK’s Institute of Circuit Technology. For the last twenty years, he has been active in the RF/microwave market where thermal management is often key to optimal performance. Further, Francey has written journal articles and co-authored papers in the field of PCBs for mm-wave applications, low-loss PCB substrates, and passive intermodulation (cellular, PCB/microstrip-based antenna).